Daily Papers

JINSP(Jiutian Intelligence Network Simulation Platform) describes a series of basic emulators and their combinations, such as the simulation of the protocol stack for dynamic users in a real environment, which is composed of user behavior simulation, base station simulation, and terminal simulation. It is applied in specific business scenarios, such as multi-target antenna optimization, compression feedback, and so on. This paper provides detailed descriptions of each emulator and its combination based on this foundation, including the implementation process of the emulator, integration with the platform, experimental results, and other aspects.

This paper presents a fully automated, data-driven framework for the large-scale deployment of reconfigurable intelligent surfaces (RISs) in cellular networks. Leveraging physically consistent ray tracing and empirical data from a commercial deployment in the UK, the proposed method jointly optimizes RIS placement, orientation, configuration, and base station beamforming in dense urban environments across frequency bands (corresponding to 4G, 5G, and a hypothetical 6G system). Candidate RIS locations are identified via reflection- and scattering-based heuristics using calibrated electromagnetic models within the Sionna Ray Tracing (RT) engine. Outage users are clustered to reduce deployment complexity, and the tradeoff between coverage gains and infrastructure cost is systematically evaluated. It is shown that achieving meaningful coverage improvement in urban areas requires a dense deployment of large-aperture RIS units, raising questions about cost-effectiveness. To facilitate reproducibility and future research, the complete simulation framework and RIS deployment algorithms are provided as open-source software.

The introduction of fifth-generation (5G) radio technology has revolutionized communications, bringing unprecedented automation, capacity, connectivity, and ultra-fast, reliable communications. However, this technological leap comes with a substantial increase in energy consumption, presenting a significant challenge. To improve the energy efficiency of 5G networks, it is imperative to develop sophisticated models that accurately reflect the influence of base station (BS) attributes and operational conditions on energy usage.Importantly, addressing the complexity and interdependencies of these diverse features is particularly challenging, both in terms of data processing and model architecture design. This paper proposes a novel 5G base stations energy consumption modelling method by learning from a real-world dataset used in the ITU 5G Base Station Energy Consumption Modelling Challenge in which our model ranked second. Unlike existing methods that omit the Base Station Identifier (BSID) information and thus fail to capture the unique energy fingerprint in different base stations, we incorporate the BSID into the input features and encoding it with an embedding layer for precise representation. Additionally, we introduce a novel masked training method alongside an attention mechanism to further boost the model's generalization capabilities and accuracy. After evaluation, our method demonstrates significant improvements over existing models, reducing Mean Absolute Percentage Error (MAPE) from 12.75% to 4.98%, leading to a performance gain of more than 60%.

Massive multiple-input multiple-output (MIMO) communication systems have a huge potential both in terms of data rate and energy efficiency, although channel estimation becomes challenging for a large number of antennas. Using a physical model allows to ease the problem by injecting a priori information based on the physics of propagation. However, such a model rests on simplifying assumptions and requires to know precisely the configuration of the system, which is unrealistic in practice.In this paper we present mpNet, an unfolded neural network specifically designed for massive MIMO channel estimation. It is trained online in an unsupervised way. Moreover, mpNet is computationally efficient and automatically adapts its depth to the signal-to-noise ratio (SNR). The method we propose adds flexibility to physical channel models by allowing a base station (BS) to automatically correct its channel estimation algorithm based on incoming data, without the need for a separate offline training phase.It is applied to realistic millimeter wave channels and shows great performance, achieving a channel estimation error almost as low as one would get with a perfectly calibrated system. It also allows incident detection and automatic correction, making the BS resilient and able to automatically adapt to changes in its environment.

Intelligent surfaces represent a breakthrough technology capable of customizing the wireless channel cost-effectively. However, the existing works generally focus on planar wavefront, neglecting near-field spherical wavefront characteristics caused by large array aperture and high operation frequencies in the terahertz (THz). Additionally, the single-layer reconfigurable intelligent surface (RIS) lacks the signal processing ability to mitigate the computational complexity at the base station (BS). To address this issue, we introduce a novel stacked intelligent metasurfaces (SIM) comprised of an array of programmable metasurface layers. The SIM aims to substitute conventional digital baseband architecture to execute computing tasks with ultra-low processing delay, albeit with a reduced number of radio-frequency (RF) chains and low-resolution digital-to-analog converters. In this paper, we present a SIM-aided multiuser multiple-input single-output (MU-MISO) near-field system, where the SIM is integrated into the BS to perform beamfocusing in the wave domain and customize an end-to-end channel with minimized inter-user interference. Finally, the numerical results demonstrate that near-field communication achieves superior spatial gain over the far-field, and the SIM effectively suppresses inter-user interference as the wireless signals propagate through it.

An important concept in the fifth generation of mobile networks is multitenancy, which allows diverse operators sharing the same wireless infrastructure. To support this feature in conjunction with the challenging performance requirements of future networks, more automated and faster planning of the required radio capacity is needed. Likewise, installing small cells is an effective resource to provide greater performance and capacity to both indoor and outdoor places. This paper proposes a new framework for automated cell planning in multitenant small cell networks. In particular, taking advantage of the available network data, a set of detailed planning specifications over time and space domains are generated in order to meet the contracted capacity by each tenant. Then, the network infrastructure and configuration are updated according to an algorithm that considers different actions such as adding/removing channels and adding or relocating small cells. The simulation results show the effectiveness of various methods to derive the planning specifications depending on the correlation between the tenant's and network's traffic demands.

This paper investigates the performance of network non-orthogonal multiple access (N-NOMA) in a downlink coordinated multi-point (CoMP) system. In the considered N-NOMA scheme, multiple base stations (BSs) cooperatively serve a CoMP user, meanwhile, each BS serves additional NOMA users by occupying the same resource block allocated to the CoMP user. The locations of the BSs and users are modeled by stochastic geometric models and the interference from the whole network is considered. Through rigorous derivations, the outage probabilities achieved by the CoMP and NOMA users are obtained, respectively. Numerical results are provided to verify the accuracy of the analytical results and also demonstrate the superior performance of N-NOMA compared to orthogonal multiple access (OMA) based CoMP scheme.

Long-term user engagement (LTE) optimization in sequential recommender systems (SRS) is shown to be suited by reinforcement learning (RL) which finds a policy to maximize long-term rewards. Meanwhile, RL has its shortcomings, particularly requiring a large number of online samples for exploration, which is risky in real-world applications. One of the appealing ways to avoid the risk is to build a simulator and learn the optimal recommendation policy in the simulator. In LTE optimization, the simulator is to simulate multiple users' daily feedback for given recommendations. However, building a user simulator with no reality-gap, i.e., can predict user's feedback exactly, is unrealistic because the users' reaction patterns are complex and historical logs for each user are limited, which might mislead the simulator-based recommendation policy. In this paper, we present a practical simulator-based recommender policy training approach, Simulation-to-Recommendation (Sim2Rec) to handle the reality-gap problem for LTE optimization. Specifically, Sim2Rec introduces a simulator set to generate various possibilities of user behavior patterns, then trains an environment-parameter extractor to recognize users' behavior patterns in the simulators. Finally, a context-aware policy is trained to make the optimal decisions on all of the variants of the users based on the inferred environment-parameters. The policy is transferable to unseen environments (e.g., the real world) directly as it has learned to recognize all various user behavior patterns and to make the correct decisions based on the inferred environment-parameters. Experiments are conducted in synthetic environments and a real-world large-scale ride-hailing platform, DidiChuxing. The results show that Sim2Rec achieves significant performance improvement, and produces robust recommendations in unseen environments.

Open Radio Access Network systems, with their virtualized base stations (vBSs), offer operators the benefits of increased flexibility, reduced costs, vendor diversity, and interoperability. Optimizing the allocation of resources in a vBS is challenging since it requires knowledge of the environment, (i.e., "external'' information), such as traffic demands and channel quality, which is difficult to acquire precisely over short intervals of a few seconds. To tackle this problem, we propose an online learning algorithm that balances the effective throughput and vBS energy consumption, even under unforeseeable and "challenging'' environments; for instance, non-stationary or adversarial traffic demands. We also develop a meta-learning scheme, which leverages the power of other algorithmic approaches, tailored for more "easy'' environments, and dynamically chooses the best performing one, thus enhancing the overall system's versatility and effectiveness. We prove the proposed solutions achieve sub-linear regret, providing zero average optimality gap even in challenging environments. The performance of the algorithms is evaluated with real-world data and various trace-driven evaluations, indicating savings of up to 64.5% in the power consumption of a vBS compared with state-of-the-art benchmarks.

This paper aims to provide a proof of concept of the accuracy of simulations for advanced networking study. The particular target technology is the Differentiated Services (DiffServ) architecture. The method has been to apply experimental activities conducted in a real network to a simulation environment, to gather the same performance parameters and to compare results. A worthy re-engineering of the DiffServ module of the deployed software program has been carried out and significant contribution have been made to overcome the encountered limitations and to enrich its modeling capabilities. Final results give useful suggestions for a more critical approach to simulations targeted for advanced networking study.

Fake base stations (FBSes) pose a significant security threat by impersonating legitimate base stations (BSes). Though efforts have been made to defeat this threat, up to this day, the presence of FBSes and the multi-step attacks (MSAs) stemming from them can lead to unauthorized surveillance, interception of sensitive information, and disruption of network services. Therefore, detecting these malicious entities is crucial to ensure the security and reliability of cellular networks. Traditional detection methods often rely on additional hardware, rules, signal scanning, changing protocol specifications, or cryptographic mechanisms that have limitations and incur huge infrastructure costs. In this paper, we develop FBSDetector-an effective and efficient detection solution that can reliably detect FBSes and MSAs from layer-3 network traces using machine learning (ML) at the user equipment (UE) side. To develop FBSDetector, we create FBSAD and MSAD, the first-ever high-quality and large-scale datasets incorporating instances of FBSes and 21 MSAs. These datasets capture the network traces in different real-world cellular network scenarios (including mobility and different attacker capabilities) incorporating legitimate BSes and FBSes. Our novel ML framework, specifically designed to detect FBSes in a multi-level approach for packet classification using stateful LSTM with attention and trace level classification and MSAs using graph learning, can effectively detect FBSes with an accuracy of 96% and a false positive rate of 2.96%, and recognize MSAs with an accuracy of 86% and a false positive rate of 3.28%. We deploy FBSDetector as a real-world solution to protect end-users through a mobile app and validate it in real-world environments. Compared to the existing heuristic-based solutions that fail to detect FBSes, FBSDetector can detect FBSes in the wild in real-time.

Radio frequency (RF) signal mapping, which is the process of analyzing and predicting the RF signal strength and distribution across specific areas, is crucial for cellular network planning and deployment. Traditional approaches to RF signal mapping rely on statistical models constructed based on measurement data, which offer low complexity but often lack accuracy, or ray tracing tools, which provide enhanced precision for the target area but suffer from increased computational complexity. Recently, machine learning (ML) has emerged as a data-driven method for modeling RF signal propagation, which leverages models trained on synthetic datasets to perform RF signal mapping in "unseen" areas. In this paper, we present Geo2SigMap, an ML-based framework for efficient and high-fidelity RF signal mapping using geographic databases. First, we develop an automated framework that seamlessly integrates three open-source tools: OpenStreetMap (geographic databases), Blender (computer graphics), and Sionna (ray tracing), enabling the efficient generation of large-scale 3D building maps and ray tracing models. Second, we propose a cascaded U-Net model, which is pre-trained on synthetic datasets and employed to generate detailed RF signal maps, leveraging environmental information and sparse measurement data. Finally, we evaluate the performance of Geo2SigMap via a real-world measurement campaign, where three types of user equipment (UE) collect over 45,000 data points related to cellular information from six LTE cells operating in the citizens broadband radio service (CBRS) band. Our results show that Geo2SigMap achieves an average root-mean-square-error (RMSE) of 6.04 dB for predicting the reference signal received power (RSRP) at the UE, representing an average RMSE improvement of 3.59 dB compared to existing methods.

This paper explores the use of generative models to synthesize high-quality, site-specific multiple-input multiple-output (MIMO) channel data, addressing the high cost of the extensive measurement campaigns required to acquire real-world data for AI-native wireless networks. Two location-conditioned generative paradigms are compared: a conditional denoising diffusion implicit model (cDDIM), and a conditional flow matching model (cFMM). Both these models generate MIMO channel matrices conditioned on user coordinates, to preserve the spatial structure of the deployment site. The approaches are evaluated across three dimensions: statistical fidelity (including beam consistency and effective rank), generation efficiency, and utility in downstream tasks such as channel-state information compression and beam alignment. Results across diverse propagation scenarios (28 GHz and 3.5 GHz, both line-of-sight and non-line-of-sight) demonstrate that both models accurately capture site-specific characteristics, even when trained on scarce ground-truth data. Notably, cFMM achieves a quality comparable to cDDIM with roughly an order of magnitude less inference time. Augmenting scarce site-specific datasets with these synthetic channels yields hefty performance gains in downstream physical layer tasks compared to using scarce data alone or stochastic channels.

6G networks will introduce unprecedented complexity, which calls for a paradigm shift in network optimization and management. Artificial intelligence (AI)-based solutions, especially those enabled by the recently developed foundation models, have been recognized as promising candidates. Foundation models are large-scale AI models with general-purpose feature extraction capabilities, and once trained on massive amounts of data, they can be adapted to solve a wide range of downstream tasks, either in a zero-shot manner or with few-shot fine-tuning. This article provides a comprehensive overview of how foundation models are reshaping physical-layer processing and wireless resource management across three progressive paradigms. First, we examine the adaptation of off-the-shelf pre-trained foundation models to various wireless tasks. Second, we explore wireless-native foundation models, built from scratch on wireless data to bridge cross-domain modality gaps and capture universal wireless-domain physical characteristics. Third, we highlight agentic foundation models, which elevate static data processing into autonomous, reasoning-driven network orchestration. Furthermore, we discuss the impact of applying foundation models to emerging 6G frontiers, including integrated sensing and communications (ISAC), new multiple-input multiple-output (MIMO) architectures, semantic communications, and system-level network autonomy. Finally, we identify critical open challenges and opportunities, charting a promising path toward fully intelligent and adaptive wireless networks.

Mobile users (or UEs, to use 3GPP terminology) served by small cells in dense urban settings may abruptly experience a significant deterioration in their channel to their serving base stations (BSs) in several scenarios, such as after turning a corner around a tall building, or a sudden knot of traffic blocking the direct path between the UE and its serving BS. In this work, we propose a scheme to temporarily increase the data rate to/from this UE with additional bandwidth from the nearest Coordinated Multi-Point (CoMP) cluster of BSs, while the slower process of handover of the UE to a new serving BS is ongoing. We emphasize that this additional bandwidth is additional to the data rates the UE is getting over its primary connection to the current serving BS and, after the handover, to the new serving BS. The key novelty of the present work is the proposal of a decentralized market-based resource allocation method to perform resource allocation to support Coordinated Beamforming (CB) CoMP. It is scalable to large numbers of UEs and BSs, and it is fast because resource allocations are made bilaterally, between BSs and UEs. Once the resource allocation to the UE has been made, the coordinated of transmissions occurs as per the usual CB methods. Thus the proposed method has the benefit of giving the UE access to its desired amount of resources fast, without waiting for handover to complete, or reporting channel state information before it knows the resources it will be allocated for receiving transmissions from the serving BS.

This article mainly introduces how to use various basic emulators to form a combined emulator in the Jiutian Intelligence Network Simulation Platform to realize simulation service functions in different business scenarios. Among them, the combined emulator is included. The business scenarios include different practical applications such as multi-objective antenna optimization, high traffic of business, CSI (channel state information) compression feedback, etc.

The expansion of the low-altitude economy has underscored the significance of Low-Altitude Network Coverage (LANC) prediction for designing aerial corridors. While accurate LANC forecasting hinges on the antenna beam patterns of Base Stations (BSs), these patterns are typically proprietary and not readily accessible. Operational parameters of BSs, which inherently contain beam information, offer an opportunity for data-driven low-altitude coverage prediction. However, collecting extensive low-altitude road test data is cost-prohibitive, often yielding only sparse samples per BS. This scarcity results in two primary challenges: imbalanced feature sampling due to limited variability in high-dimensional operational parameters against the backdrop of substantial changes in low-dimensional sampling locations, and diminished generalizability stemming from insufficient data samples. To overcome these obstacles, we introduce a dual strategy comprising expert knowledge-based feature compression and disentangled representation learning. The former reduces feature space complexity by leveraging communications expertise, while the latter enhances model generalizability through the integration of propagation models and distinct subnetworks that capture and aggregate the semantic representations of latent features. Experimental evaluation confirms the efficacy of our framework, yielding a 7% reduction in error compared to the best baseline algorithm. Real-network validations further attest to its reliability, achieving practical prediction accuracy with MAE errors at the 5dB level.

Effective solutions for intelligent data collection in terrestrial cellular networks are crucial, especially in the context of Internet of Things applications. The limited spectrum and coverage area of terrestrial base stations pose challenges in meeting the escalating data rate demands of network users. Unmanned aerial vehicles, known for their high agility, mobility, and flexibility, present an alternative means to offload data traffic from terrestrial BSs, serving as additional access points. This paper introduces a novel approach to efficiently maximize the utilization of multiple UAVs for data traffic offloading from terrestrial BSs. Specifically, the focus is on maximizing user association with UAVs by jointly optimizing UAV trajectories and users association indicators under quality of service constraints. Since, the formulated UAVs control problem is nonconvex and combinatorial, this study leverages the multi agent reinforcement learning framework. In this framework, each UAV acts as an independent agent, aiming to maintain inter UAV cooperative behavior. The proposed approach utilizes the finite state Markov decision process to account for UAVs velocity constraints and the relationship between their trajectories and state space. A low complexity distributed state action reward state action algorithm is presented to determine UAVs optimal sequential decision making policies over training episodes. The extensive simulation results validate the proposed analysis and offer valuable insights into the optimal UAV trajectories. The derived trajectories demonstrate superior average UAV association performance compared to benchmark techniques such as Q learning and particle swarm optimization.

In unmanned aerial vehicle (UAV) networks, communication protocols and algorithms are essential for cooperation and collaboration between UAVs. Simulation provides a cost-effective solution for prototyping, debugging, and analyzing protocols and algorithms, avoiding the prohibitive expenses of field experiments. In this paper, we present ``UavNetSim-v1'', an open-source Python-based simulation platform designed for rapid development, testing, and evaluating the protocols and algorithms in UAV networks. ``UavNetSim-v1'' provides most of the functionalities developers may need, including routing/medium access control (MAC) protocols, topology control algorithms and mobility/energy models, while maintaining ease of use. Furthermore, the platform supports comprehensive performance evaluation and features an interactive visualization interface for in-depth algorithm analysis. In short, ``UavNetSim-v1'' lends itself to both rapid prototyping and educational purposes, and can serve as a lightweight yet powerful alternative to mature network simulators for UAV communication research.

The use of mmWave frequencies is one of the key strategies to achieve the fascinating 1000x increase in the capacity of future 5G wireless systems. While for traditional sub-6 GHz cellular frequencies several well-developed statistical channel models are available for system simulation, similar tools are not available for mmWave frequencies, thus preventing a fair comparison of independently developed transmission and reception schemes. In this paper we provide a simple albeit accurate statistical procedure for the generation of a clustered MIMO channel model operating at mmWaves, for both the cases of slowly and rapidly time-varying channels. Matlab scripts for channel generation are also provided, along with an example of their use.

We propose an innovative machine learning-based technique to address the problem of channel acquisition at the base station in frequency division duplex systems. In this context, the base station reconstructs the full channel state information in the downlink frequency range based on limited downlink channel state information feedback from the mobile terminal. The channel state information recovery is based on a convolutional neural network which is trained exclusively on collected channel state samples acquired in the uplink frequency domain. No acquisition of training samples in the downlink frequency range is required at all. Finally, after a detailed presentation and analysis of the proposed technique and its performance, the "transfer learning'' assumption of the convolutional neural network that is central to the proposed approach is validated with an analysis based on the maximum mean discrepancy metric.

Edge computing, with its low latency, dynamic scalability, and location awareness, along with the convergence of computing and communication paradigms, has been successfully applied in critical domains such as industrial IoT, smart healthcare, smart homes, and public safety. This paper provides a comprehensive survey of open-source edge computing simulators and emulators, presented in our GitHub repository (https://github.com/qijianpeng/awesome-edge-computing), emphasizing the convergence of computing and networking paradigms. By examining more than 40 tools, including CloudSim, NS-3, and others, we identify the strengths and limitations in simulating and emulating edge environments. This survey classifies these tools into three categories: packet-level, application-level, and emulators. Furthermore, we evaluate them across five dimensions, ranging from resource representation to resource utilization. The survey highlights the integration of different computing paradigms, packet processing capabilities, support for edge environments, user-defined metric interfaces, and scenario visualization. The findings aim to guide researchers in selecting appropriate tools for developing and validating advanced computing and networking technologies.

Efficient downlink radio resource management in 5G requires jointly optimizing user scheduling and transmit-power allocation under time-varying wireless conditions. This is challenging in OFDMA systems because PRB assignment is combinatorial, power allocation is continuous, and performance depends on channel evolution, link adaptation, and long-term fairness. We propose a hierarchical cooperative multi-agent reinforcement learning framework with staged curriculum training for joint downlink PRB and power allocation in a physically grounded 5G environment. System-level simulation is implemented in Sionna, while Sionna RT supports wireless scene construction and mobility-aware ray-traced channel generation. The control task is decomposed into two sequential stages: a PRB agent learns user-level resource shares, which are converted to exact PRB assignments by a deterministic channel-aware quota resolver, and a power agent distributes the base-station power budget across users and their assigned PRB-symbol resources. The framework operates in a cross-layer loop with adaptive modulation and coding, HARQ feedback, outer-loop link adaptation, and a fairness-aware reward based on smoothed throughput and Jain's fairness index. Training stability is improved through a three-phase curriculum for PRB allocation, power control, and joint fine-tuning. Under matched channel realizations, we compare against a PF scheduler with equal-power transmission and two ablations isolating the learned PRB and power-control components. Results show that both learned components improve throughput distribution relative to PF, while the full PRB and power controller achieves the largest cell-throughput gain with only a modest reduction in Jain's fairness index.

SiFo, a wireless foundation model-based framework, is proposed for low-overhead site-specific channel state information (CSI) feedback. In 3GPP NR, Type-II feedback provides an expressive codebook-based CSI representation, but it requires substantial reference-signal overhead, UE-side search, and feedback. Learning-based site-specific feedback can reduce these online costs while retaining high-quality subspace representation by exploiting deployment-dependent propagation structure. However, existing site-specific designs typically train a dedicated neural network for each new site, which limits scalability when the number of deployments is large. SiFo addresses this scalability issue by pretraining a CSI feedback model across source sites and adapting it to a target site through lightweight calibration. A small set of target-site users reports low-dimensional reference signal received power (RSRP) fingerprints, and their full-CSI-based subspace labels are stored as calibration memory. During online operation, a served user is matched to calibrated users through the same SSB probing and RSRP reporting procedure, so nearby calibration samples provide site-specific subspace guidance without updating model parameters. SiFo therefore transfers common propagation knowledge while retaining local adaptation. Numerical results across ten city scenarios demonstrate that SiFo (i) achieves higher CSI-capture efficiency than separately trained site-specific learning baselines under the same target-site labeled budget, (ii) approaches the high-overhead 3GPP NR Type-II feedback reference using only RSRP measurements collected during online SSB probing, and (iii) converts the high CSI-capture efficiency and low overhead into effective spectral efficiency improvement under limited target-site data.

Radio Frequency Reinforcement Learning (RFRL) is anticipated to be a widely applicable technology in the next generation of wireless communication systems, particularly 6G and next-gen military communications. Given this, our research is focused on developing a tool to promote the development of RFRL techniques that leverage spectrum sensing. In particular, the tool was designed to address two cognitive radio applications, specifically dynamic spectrum access and jamming. In order to train and test reinforcement learning (RL) algorithms for these applications, a simulation environment is necessary to simulate the conditions that an agent will encounter within the Radio Frequency (RF) spectrum. In this paper, such an environment has been developed, herein referred to as the RFRL Gym. Through the RFRL Gym, users can design their own scenarios to model what an RL agent may encounter within the RF spectrum as well as experiment with different spectrum sensing techniques. Additionally, the RFRL Gym is a subclass of OpenAI gym, enabling the use of third-party ML/RL Libraries. We plan to open-source this codebase to enable other researchers to utilize the RFRL Gym to test their own scenarios and RL algorithms, ultimately leading to the advancement of RL research in the wireless communications domain. This paper describes in further detail the components of the Gym, results from example scenarios, and plans for future additions. Index Terms-machine learning, reinforcement learning, wireless communications, dynamic spectrum access, OpenAI gym

In this paper we propose a highly efficient and very accurate deep learning method for estimating the propagation pathloss from a point x (transmitter location) to any point y on a planar domain. For applications such as user-cell site association and device-to-device link scheduling, an accurate knowledge of the pathloss function for all pairs of transmitter-receiver locations is very important. Commonly used statistical models approximate the pathloss as a decaying function of the distance between transmitter and receiver. However, in realistic propagation environments characterized by the presence of buildings, street canyons, and objects at different heights, such radial-symmetric functions yield very misleading results. In this paper we show that properly designed and trained deep neural networks are able to learn how to estimate the pathloss function, given an urban environment, in a very accurate and computationally efficient manner. Our proposed method, termed RadioUNet, learns from a physical simulation dataset, and generates pathloss estimations that are very close to the simulations, but are much faster to compute for real-time applications. Moreover, we propose methods for transferring what was learned from simulations to real-life. Numerical results show that our method significantly outperforms previously proposed methods.

The upper 6 GHz (U6G) band with XL-MIMO is a key enabler for sixth-generation wireless systems, yet intelligent radiomap prediction for such systems remains challenging. Existing datasets support only small-scale arrays (up to 8x8) with predominantly isotropic antennas, far from the 1024-element directional arrays envisioned for 6G. Moreover, current methods encode array configurations as scalar parameters, forcing neural networks to extrapolate array-specific radiation patterns, which fails when predicting radiomaps for configurations absent from training data. To jointly address data scarcity and generalization limitations, this paper advances XL-MIMO radiomap prediction from three aspects. To overcome data limitations, we construct the first XL-MIMO radiomap dataset containing 78400 radiomaps across 800 urban scenes, five frequency bands (1.8-6.7 GHz), and nine array configurations up to 32x32 uniform planar arrays with directional elements. To enable systematic evaluation, we establish a comprehensive benchmark framework covering practical scenarios from coverage estimation without field measurements to generalization across unseen configurations and environments. To enable generalization to arbitrary beam configurations without retraining, we propose the beam map, a physics-informed spatial feature that analytically computes array-specific coverage patterns. By decoupling deterministic array radiation from data learned multipath propagation, beam maps shift generalization from neural network extrapolation to physics-based computation. Integrating beam maps into existing architectures reduces mean absolute error by up to 60.0% when generalizing to unseen configurations and up to 50.5% when transferring to unseen environments. The complete dataset and code are publicly available at https://lxj321.github.io/MulticonfigRadiomapDataset/.

Sixth generation (6G) systems require environment-aware communication, driven by native artificial intelligence (AI) and integrated sensing and communication (ISAC). Radio maps (RMs), providing spatially continuous channel information, are key enablers. However, generating high-fidelity RM ground truth via electromagnetic (EM) simulations is computationally intensive, motivating machine learning (ML)-based RM construction. The effectiveness of these data-driven methods depends on large-scale, high-quality training data. Current public datasets often focus on single-input single-output (SISO) and limited information, such as path loss, which is insufficient for advanced multi-input multi-output (MIMO) systems requiring detailed channel state information (CSI). To address this gap, this paper presents UrbanMIMOMap, a novel large-scale urban MIMO CSI dataset generated using high-precision ray tracing. UrbanMIMOMap offers comprehensive complex CSI matrices across a dense spatial grid, going beyond traditional path loss data. This rich CSI is vital for constructing high-fidelity RMs and serves as a fundamental resource for data-driven RM generation, including deep learning. We demonstrate the dataset's utility through baseline performance evaluations of representative ML methods for RM construction. This work provides a crucial dataset and reference for research in high-precision RM generation, MIMO spatial performance, and ML for 6G environment awareness. The code and data for this work are available at: https://github.com/UNIC-Lab/UrbanMIMOMap.

The quickly increasing data traffic and the user demand for a full coverage of mobile services anywhere and anytime are leading mobile networking into a future of small cell networks. However, due to the high-density and randomness of small cell networks, there are several technical challenges. In this paper, we investigate two critical issues: best signal quality and mobility management. Under the assumptions that base stations are uniformly distributed in a ring shaped region and that shadowings are lognormal, independent and identically distributed, we prove that when the number of sites in the ring tends to infinity, then (i) the maximum signal strength received at the center of the ring tends in distribution to a Gumbel distribution when properly renormalized, and (ii) it is asymptotically independent of the interference. Using these properties, we derive the distribution of the best signal quality. Furthermore, an optimized random cell scanning scheme is proposed, based on the evaluation of the optimal number of sites to be scanned for maximizing the user data throughput.

Radio-frequency coverage maps (RF maps) are extensively utilized in wireless networks for capacity planning, placement of access points and base stations, localization, and coverage estimation. Conducting site surveys to obtain RF maps is labor-intensive and sometimes not feasible. In this paper, we propose radio-frequency adversarial deep-learning inference for automated network coverage estimation (RADIANCE), a generative adversarial network (GAN) based approach for synthesizing RF maps in indoor scenarios. RADIANCE utilizes a semantic map, a high-level representation of the indoor environment to encode spatial relationships and attributes of objects within the environment and guide the RF map generation process. We introduce a new gradient-based loss function that computes the magnitude and direction of change in received signal strength (RSS) values from a point within the environment. RADIANCE incorporates this loss function along with the antenna pattern to capture signal propagation within a given indoor configuration and generate new patterns under new configuration, antenna (beam) pattern, and center frequency. Extensive simulations are conducted to compare RADIANCE with ray-tracing simulations of RF maps. Our results show that RADIANCE achieves a mean average error (MAE) of 0.09, root-mean-squared error (RMSE) of 0.29, peak signal-to-noise ratio (PSNR) of 10.78, and multi-scale structural similarity index (MS-SSIM) of 0.80.

Modeling radio propagation is essential for wireless network design and performance optimization. Traditional methods rely on physics models of radio propagation, which can be inaccurate or inflexible. In this work, we propose using graph neural networks to learn radio propagation behaviors directly from real-world network data. Our approach converts the radio propagation environment into a graph representation, with nodes corresponding to locations and edges representing spatial and ray-tracing relationships between locations. The graph is generated by converting images of the environment into a graph structure, with specific relationships between nodes. The model is trained on this graph representation, using sensor measurements as target data. We demonstrate that the graph neural network, which learns to predict radio propagation directly from data, achieves competitive performance compared to traditional heuristic models. This data-driven approach outperforms classic numerical solvers in terms of both speed and accuracy. To the best of our knowledge, we are the first to apply graph neural networks to real-world radio propagation data to generate coverage maps, enabling generative models of signal propagation with point measurements only.

With the growing complexity and dynamics of the mobile communication networks, accurately predicting key system parameters, such as channel state information (CSI), user location, and network traffic, has become essential for a wide range of physical (PHY)-layer and medium access control (MAC)-layer tasks. Although traditional deep learning (DL)-based methods have been widely applied to such prediction tasks, they often struggle to generalize across different scenarios and tasks. In response, we propose a unified foundation model for multi-task prediction in wireless networks that supports diverse prediction intervals. The proposed model enforces univariate decomposition to unify heterogeneous tasks, encodes granularity for interval awareness, and uses a causal Transformer backbone for accurate predictions. Additionally, we introduce a patch masking strategy during training to support arbitrary input lengths. After trained on large-scale datasets, the proposed foundation model demonstrates strong generalization to unseen scenarios and achieves zero-shot performance on new tasks that surpass traditional full-shot baselines.

This work introduces a fully-automated RIS deployment strategy validated through a digital twin, powered by Sionna ray tracing, of a UK city. On a scene calibrated with measured data, the method jointly optimizes RIS placement, orientation, configuration, and BS beamforming across 4G, 5G, and hypothetical 6G frequencies. Candidate RIS sites are identified via scattering-based rays, while user clustering reduces deployment overhead. Results show that meaningful coverage enhancement requires dense, large-aperture RIS deployments, raising questions about the practicality and cost of large-scale RIS adoption.

Phones are becoming an important execution surface for general-purpose agents, but training open models for reliable phone use remains difficult because the environment that matters at deployment, real devices running real apps, is slow, stateful, side-effectful, and hard to reset or verify, while scalable mock environments only approximate real behavior. We present PhoneBuddy, a training recipe and open-model line for agentic phone use that combines a real-app environment with a mock-app environment, PhoneWorld, which reconstructs runnable mock apps from real GUI usage structure. PhoneBuddy first builds a shared supervised fine-tuning stage from trajectories collected in both environments, then compares real-app RL against mixed RL across both environments. Across a 150-task human evaluation on real phones spanning apps, mini-apps, and cross-app workflows, task success rate improves from 36.67\% after supervised fine-tuning to 40.67\% after real-app RL and 45.33\% after mixed RL. On AndroidWorld, the same progression rises from 60.3\% to 77.2\% to 83.2\%. These results show that mock-app training is not a replacement for real-app RL, but a complementary source of scalable, resettable, and automatically checked interaction. The gains are strongest on app and mini-app tasks, while long-horizontal cross-app workflows remain an important open challenge.

The potential of applying diffusion models (DMs) for multiple antenna communications is discussed. A unified framework of applying DM for multiple antenna tasks is first proposed. Then, the tasks are innovatively divided into two categories, i.e., decision-making tasks and generation tasks, depending on whether an optimization of system parameters is involved. For each category, it is conceived 1) how the framework can be used for each task and 2) why the DM is superior to traditional artificial intelligence (TAI) and conventional optimization tasks. It is highlighted that the DMs are well-suited for scenarios with strong interference and noise, excelling in modeling complex data distribution and exploring better actions. A case study of learning beamforming with a DM is then provided, to demonstrate the superiority of the DMs with simulation results. Finally, the applications of DM for emerging multiple antenna technologies and promising research directions are discussed.

The spectral smoothness properties of the low-frequency array of the Square Kilometer Array (SKA), namely SKA-Low, are an important issue for its scientific objectives to be attainable. A large array of 256 log-periodic dipole antennas, installed on top of a 42~m circular ground plane, will work as an SKA-Low station in the frequency range 50-350 MHz. In this article, the ground plane induced effects are examined in terms of antenna beam spectral characteristics, while different antenna placements are considered. Results are produced both at isolated antenna and at array level in the band 50-100 MHz, by employing an approximate method for the speeding-up of array simulations. We attempt to distinguish the ground plane effect from that of mutual coupling among antennas, which appears to be more severe at specific frequencies, using 2 figures of merit. The Discrete Fourier Transform (DFT) components of gain pattern ratios identify the fundamental spatial components of the ripple, while the Envelope Correlation Coefficient quantifies the penalty to considering an infinite ground plane.

Radio maps (RMs) serve as a critical foundation for enabling environment-aware wireless communication, as they provide the spatial distribution of wireless channel characteristics. Despite recent progress in RM construction using data-driven approaches, most existing methods focus solely on pathloss prediction in a fixed 2D plane, neglecting key parameters such as direction of arrival (DoA), time of arrival (ToA), and vertical spatial variations. Such a limitation is primarily due to the reliance on static learning paradigms, which hinder generalization beyond the training data distribution. To address these challenges, we propose UrbanRadio3D, a large-scale, high-resolution 3D RM dataset constructed via ray tracing in realistic urban environments. UrbanRadio3D is over 37times3 larger than previous datasets across a 3D space with 3 metrics as pathloss, DoA, and ToA, forming a novel 3Dtimes33D dataset with 7times3 more height layers than prior state-of-the-art (SOTA) dataset. To benchmark 3D RM construction, a UNet with 3D convolutional operators is proposed. Moreover, we further introduce RadioDiff-3D, a diffusion-model-based generative framework utilizing the 3D convolutional architecture. RadioDiff-3D supports both radiation-aware scenarios with known transmitter locations and radiation-unaware settings based on sparse spatial observations. Extensive evaluations on UrbanRadio3D validate that RadioDiff-3D achieves superior performance in constructing rich, high-dimensional radio maps under diverse environmental dynamics. This work provides a foundational dataset and benchmark for future research in 3D environment-aware communication. The dataset is available at https://github.com/UNIC-Lab/UrbanRadio3D.

Driven by new types of wireless devices and the proliferation of bandwidth-intensive applications, data traffic and the corresponding network load are increasing dramatically. Network densification has been recognized as a promising and efficient way to provide higher network capacity and enhanced coverage. Most prior work on performance analysis of ultra-dense networks (UDNs) has focused on random spatial deployment with idealized singular path loss models and Rayleigh fading. In this paper, we consider a more precise and general model, which incorporates multi-slope path loss and general fading distributions. We derive the tail behavior and scaling laws for the coverage probability and the capacity considering strongest base station association in a Poisson field network. Our analytical results identify the regimes in which the signal-to-interference-plus-noise ratio (SINR) either asymptotically grows, saturates, or decreases with increasing network density. We establish general results on when UDNs lead to worse or even zero SINR coverage and capacity, and we provide crisp insights on the fundamental limits of wireless network densification.

Deep learning is widely used in wireless communications but struggles with fixed neural network sizes, which limit their adaptability in environments where the number of users and antennas varies. To overcome this, this paper introduced a generalization strategy for precoding and power allocation in scalable wireless networks. Initially, we employ an innovative approach to abstract the wireless network into a homogeneous graph. This primarily focuses on bypassing the heterogeneous features between transmitter (TX) and user entities to construct a virtual homogeneous graph serving optimization objectives, thereby enabling all nodes in the virtual graph to share the same neural network. This "TX entity" is known as a base station (BS) in cellular networks and an access point (AP) in cell-free networks. Subsequently, we design a universal graph neural network, termed the information carrying graph neural network (ICGNN), to capture and integrate information from this graph, maintaining permutation invariance. Lastly, using ICGNN as the core algorithm, we tailor the neural network's input and output for specific problem requirements and validate its performance in two scenarios: 1) in cellular networks, we develop a matrix-inverse-free multi-user multi-input multi-output (MU-MIMO) precoding scheme using the conjugate gradient (CG) method, adaptable to varying user and antenna numbers; 2) in a cell-free network, facing dynamic variations in the number of users served by APs, the number of APs serving each user, and the number of antennas per AP, we propose a universal power allocation scheme. Simulations demonstrate that the proposed approach not only significantly reduces computational complexity but also achieves, and potentially exceeds, the spectral efficiency (SE) of conventional algorithms.

Reconfigurable intelligent surfaces (RISs) have become one of the key technologies in 6G wireless communications. By configuring the reflection beamforming codebooks, RIS focuses signals on target receivers. In this paper, we investigate the codebook configuration for 1-bit RIS-aided systems. We propose a novel learning-based method built upon the advanced methodology of implicit neural representations. The proposed model learns a continuous and differentiable coordinate-to-codebook representation from samplings. Our method only requires the information of the user's coordinate and avoids the assumption of channel models. Moreover, we propose an encoding-decoding strategy to reduce the dimension of codebooks, and thus improve the learning efficiency of the proposed method. Experimental results on simulation and measured data demonstrated the remarkable advantages of the proposed method.

Ray tracing has become a standard for accurate radio propagation modeling, but suffers from exponential computational complexity, as the number of candidate paths scales with the number of objects raised to the power of the interaction order. This bottleneck limits its use in large-scale or real-time applications, forcing traditional tools to rely on heuristics to reduce the number of path candidates at the cost of potentially reduced accuracy. To overcome this limitation, we propose a comprehensive machine-learning-assisted framework that replaces exhaustive path searching with intelligent sampling via Generative Flow Networks. Applying such generative models to this domain presents significant challenges, particularly sparse rewards due to the rarity of valid paths, which can lead to convergence failures and trivial solutions when evaluating high-order interactions in complex environments. To ensure robust learning and efficient exploration, our framework incorporates three key architectural components. First, we implement an experience replay buffer to capture and retain rare valid paths. Second, we adopt a uniform exploratory policy to improve generalization and prevent the model from overfitting to simple geometries. Third, we apply a physics-based action masking strategy that filters out physically impossible paths before the model even considers them. As demonstrated in our experimental validation, the proposed model achieves substantial speedups over exhaustive search -- up to 10times faster on GPU and 1000times faster on CPU -- while maintaining high coverage accuracy and successfully uncovering complex propagation paths. The complete source code, tests, and tutorial are available at https://github.com/jeertmans/sampling-paths.

Building future wireless systems that support services like digital twins (DTs) is challenging to achieve through advances to conventional technologies like meta-surfaces. While artificial intelligence (AI)-native networks promise to overcome some limitations of wireless technologies, developments still rely on AI tools like neural networks. Such tools struggle to cope with the non-trivial challenges of the network environment and the growing demands of emerging use cases. In this paper, we revisit the concept of AI-native wireless systems, equipping them with the common sense necessary to transform them into artificial general intelligence (AGI)-native systems. These systems acquire common sense by exploiting different cognitive abilities such as perception, analogy, and reasoning, that enable them to generalize and deal with unforeseen scenarios. Towards developing the components of such a system, we start by showing how the perception module can be built through abstracting real-world elements into generalizable representations. These representations are then used to create a world model, founded on principles of causality and hyper-dimensional (HD) computing, that aligns with intuitive physics and enables analogical reasoning, that define common sense. Then, we explain how methods such as integrated information theory play a role in the proposed intent-driven and objective-driven planning methods that maneuver the AGI-native network to take actions. Next, we discuss how an AGI-native network can enable use cases related to human and autonomous agents: a) analogical reasoning for next-generation DTs, b) synchronized and resilient experiences for cognitive avatars, and c) brain-level metaverse experiences like holographic teleportation. Finally, we conclude with a set of recommendations to build AGI-native systems. Ultimately, we envision this paper as a roadmap for the beyond 6G era.

Over the last years, several works have explored the application of deep learning algorithms to determine the large-scale signal fading (also referred to as ``path loss'') between transmitter and receiver pairs in urban communication networks. The central idea is to replace costly measurement campaigns, inaccurate statistical models or computationally expensive ray-tracing simulations by machine learning models which, once trained, produce accurate predictions almost instantly. Although the topic has attracted attention from many researchers, there are few open benchmark datasets and codebases that would allow everyone to test and compare the developed methods and algorithms. We take a step towards filling this gap by releasing a publicly available dataset of simulated path loss radio maps together with realistic city maps from real-world locations and aerial images from open datasources. Initial experiments regarding model architectures, input feature design and estimation of radio maps from aerial images are presented and the code is made available.

In this work, we develop a joint denoising and feedback strategy for channel state information in frequency division duplex systems. In such systems, the biggest challenge is the overhead incurred when the mobile terminal has to send the downlink channel state information or corresponding partial information to the base station, where the complete estimates can subsequently be restored. To this end, we propose a novel learning-based framework for denoising and compression of channel estimates. Unlike existing studies, we extend a recently proposed approach and show that based solely on noisy uplink data available at the base station, it is possible to learn an autoencoder neural network that generalizes to downlink data. Subsequently, half of the autoencoder can be offloaded to the mobile terminals to generate channel feedback there as efficiently as possible, without any training effort at the terminals or corresponding transfer of training data. Numerical simulations demonstrate the excellent performance of the proposed method.

We present MiMo-7B, a large language model born for reasoning tasks, with optimization across both pre-training and post-training stages. During pre-training, we enhance the data preprocessing pipeline and employ a three-stage data mixing strategy to strengthen the base model's reasoning potential. MiMo-7B-Base is pre-trained on 25 trillion tokens, with additional Multi-Token Prediction objective for enhanced performance and accelerated inference speed. During post-training, we curate a dataset of 130K verifiable mathematics and programming problems for reinforcement learning, integrating a test-difficulty-driven code-reward scheme to alleviate sparse-reward issues and employing strategic data resampling to stabilize training. Extensive evaluations show that MiMo-7B-Base possesses exceptional reasoning potential, outperforming even much larger 32B models. The final RL-tuned model, MiMo-7B-RL, achieves superior performance on mathematics, code and general reasoning tasks, surpassing the performance of OpenAI o1-mini. The model checkpoints are available at https://github.com/xiaomimimo/MiMo.

Network densification is a promising cellular deployment technique that leverages spatial reuse to enhance coverage and throughput. Recent work has identified that at some point ultra-densification will no longer be able to deliver significant throughput gains. In this paper, we provide a unified treatment of the performance limits of network densification. We develop a general framework, which incorporates multi-slope pathloss and the entire space of shadowing and small scale fading distributions, under strongest cell association in a Poisson field of interferers. First, our results show that there are three scaling regimes for the downlink signal-to-interference-plus-noise ratio (SINR), coverage probability, and average per-user rate. Specifically, depending on the near-field pathloss and the fading distribution, the user performance of 5G ultra dense networks (UDNs) would either monotonically increase, saturate, or decay with increasing network density. Second, we show that network performance in terms of coverage density and area spectral efficiency can scale with the network density better than the user performance does. Furthermore, we provide ordering results for both coverage and average rate as a means to qualitatively compare different transmission techniques that may exhibit the same performance scaling. Our results, which are verified by simulations, provide succinct insights and valuable design guidelines for the deployment of 5G UDNs.

As spatial intelligence continues to evolve, heterogeneous multi-agent systems-particularly the collaboration between Unmanned Aerial Vehicles (UAVs) and Unmanned Ground Vehicles (UGVs), have demonstrated strong potential in complex applications such as search and rescue, urban surveillance, and environmental monitoring. However, existing simulation platforms are primarily designed for single-agent dynamics and lack dedicated frameworks for interactive air-ground collaborative simulation. In this paper, we present AirsimAG, a high-fidelity air-ground collaborative simulation platform built upon an extensively customized AirSim framework. The platform enables synchronized multi-agent simulation and supports heterogeneous sensing and control interfaces for UAV-UGV systems. To demonstrate its capabilities, we design a set of representative air-ground collaborative tasks, including mapping, planning, tracking, formation, and exploration. We further provide quantitative analyses based on these tasks to illustrate the platform effectiveness in supporting multi-agent coordination and cross-modal data consistency. The AirsimAG simulation platform is publicly available at https://github.com/BIULab-BUAA/AirSimAG.

Uplink (UL) dominated sporadic transmission and stringent latency requirement of massive machine type communication (mMTC) forces researchers to abandon complicated grant-acknowledgment based legacy networks. UL grant-free non-orthogonal multiple access (NOMA) provides an array of features which can be harnessed to efficiently solve the problem of massive random connectivity and latency. Because of the inherent sparsity in user activity pattern in mMTC, the trend of existing literature specifically revolves around compressive sensing based multi user detection (CS-MUD) and Bayesian framework paradigm which employs either random or Zadoff-Chu spreading sequences for non-orthogonal multiple access. In this work, we propose sinusoidal code as candidate spreading sequences. We show that, sinusoidal codes allow some non-iterative algorithms to be employed in context of active user detection, channel estimation and data detection in a UL grant-free mMTC system. This relaxes the requirement of several impractical assumptions considered in the state-of-art algorithms with added advantages of performance guarantees and lower computational cost. Extensive simulation results validate the performance potential of sinusoidal codes in realistic mMTC environments.

Large Language Models (LLMs) exhibit strong general-purpose reasoning abilities but lack access to wireless environment information due to the absence of native sensory input and domain-specific priors. Previous attempts to apply LLMs in wireless systems either depend on retraining with network-specific data, which compromises language generalization, or rely on manually scripted interfaces, which hinder scalability. To overcome these limitations, we propose a Model Context Protocol (MCP)-based Internet of Experts (IoX) framework that equips LLMs with wireless environment-aware reasoning capabilities. The framework incorporates a set of lightweight expert models, each trained to solve a specific deterministic task in wireless communications, such as detecting a specific wireless attribute, e.g., line-of-sight propagation, Doppler effects, or fading conditions. Through MCP, the LLM can selectively query and interpret expert outputs at inference time, without modifying its own parameters. This architecture enables modular, extensible, and interpretable reasoning over wireless contexts. Evaluated across multiple mainstream LLMs, the proposed wireless environment-aware LLM agents achieve 40%-50% improvements in classification tasks over LLM-only baselines. More broadly, the MCP-based design offers a viable paradigm for future LLMs to inherit structured wireless network management capabilities.

We present a generative framework for inverse design of five-layer transmissive Huygens' metasurfaces (HMSs), addressing a longstanding challenge in achieving full-phase, high-efficiency unit cell designs with minimal full-wave simulations. The key to achieving this is our reliance on the field-based semianalytical (SA) scheme developed in Part I of this paper, which allows rapid and highly effective synthesis of such multilayer composites, however with limited accuracy. To overcome the prohibitive data demands of traditional pipelines, we employ Mamba, a selective state space model well suited for long-range sequence modeling as the backbone of our learning framework. A bidirectional Mamba (Bi-Mamba) forward surrogate is first trained on SA-generated data and subsequently fine-tuned with full-wave CST samples. An ablation over a 1080-sample CST pool shows that as few as 270 full-wave calibration samples suffice to reach near-CST-level agreement at a fraction of the simulation cost. An autoregressive Mamba inverse generator is subsequently trained on surrogate-augmented data, treating unit-cell synthesis as a sequential generation task. The resulting one-to-many generative model produces diverse unit cell geometries conditioned on target scattering responses. It achieves CST-validated designs with field transmission magnitude 0.9 across the full 0-2π phase range at 20 GHz. Moreover, a CST-calibrated surrogate trained to accurately predict frequency responses (18-22 GHz) enables functional post-selection of inverse generated designs. Together, the hybrid SA-generative methodology in this two-part compilation establishes a scalable and data-efficient solution for multilayer HMS synthesis, with natural extensions toward broadband, oblique-incidence, and higher-dimensional electromagnetic inverse-design problems.

The open radio access network (O-RAN), with its disaggregated and open architecture, is poised to meet the demands of the next generation of wireless communication. However, to unlock the full potentials of O-RAN, real-time network modeling and optimization are essential. A promising solution for such requirement is the use of network digital twin (NDT). NDT provides a comprehensive view of a network, covering both physical and logical components, including infrastructure, protocols, and algorithms. NDT, as a real-time virtual representation of O-RAN facilitates a variety of operations, such as emulations, test, optimization, monitoring, and analysis of a new configuration in a risk-free environment, without requiring them to be implemented in real network. Such capability enables the vendors and network operators for a faster adoption of new solutions with frequent updates, while ensuring the resiliency of the existing services via planning ahead under various "what-if" scenarios. In this paper, we first describe what exactly NDT means in the context of O-RAN, as well as its key enablers. We then describe the NDT application within the O-RAN in both prior and post-deployment. Finally, we provide two practical uses cases, namely network energy efficiency and traffic steering, where the NDT can be leveraged effectively.

The integration of machine learning tools into telecom networks, has led to two prevailing paradigms, namely, language-based systems, such as Large Language Models (LLMs), and physics-based systems, such as Digital Twins (DTs). While LLM-based approaches enable flexible interaction and automation, they lack explicit representations of network dynamics. DTs, in contrast, offer a high-fidelity network simulation, but remain scenario-specific and are not designed for learning or decision-making under uncertainty. This gap becomes critical for 6G systems, where decisions must take into account the evolving network states, uncertainty, and the cascading effects of control actions across multiple layers. In this article, we introduce the {Telecom World Model}~(TWM) concept, an architecture for learned, action-conditioned, uncertainty-aware modeling of telecom system dynamics. We decompose the problem into two interacting worlds, a controllable system world consisting of operator-configurable settings and an external world that captures propagation, mobility, traffic, and failures. We propose a three-layer architecture, comprising a field world model for spatial environment prediction, a control/dynamics world model for action-conditioned Key Performance Indicator (KPI) trajectory prediction, and a telecom foundation model layer for intent translation and orchestration. We showcase a comparative analysis between existing paradigms, which demonstrates that TWM jointly provides telecom state grounding, fast action-conditioned roll-outs, calibrated uncertainty, multi-timescale dynamics, model-based planning, and LLM-integrated guardrails. Furthermore, we present a proof-of-concept on network slicing to validate the proposed architecture, showing that the full three-layer pipeline outperforms single-world baselines and accurately predicts KPI trajectories.

The development of GUI agents could revolutionize the next generation of human-computer interaction. Motivated by this vision, we present MAI-UI, a family of foundation GUI agents spanning the full spectrum of sizes, including 2B, 8B, 32B, and 235B-A22B variants. We identify four key challenges to realistic deployment: the lack of native agent-user interaction, the limits of UI-only operation, the absence of a practical deployment architecture, and brittleness in dynamic environments. MAI-UI addresses these issues with a unified methodology: a self-evolving data pipeline that expands the navigation data to include user interaction and MCP tool calls, a native device-cloud collaboration system routes execution by task state, and an online RL framework with advanced optimizations to scale parallel environments and context length. MAI-UI establishes new state-of-the-art across GUI grounding and mobile navigation. On grounding benchmarks, it reaches 73.5% on ScreenSpot-Pro, 91.3% on MMBench GUI L2, 70.9% on OSWorld-G, and 49.2% on UI-Vision, surpassing Gemini-3-Pro and Seed1.8 on ScreenSpot-Pro. On mobile GUI navigation, it sets a new SOTA of 76.7% on AndroidWorld, surpassing UI-Tars-2, Gemini-2.5-Pro and Seed1.8. On MobileWorld, MAI-UI obtains 41.7% success rate, significantly outperforming end-to-end GUI models and competitive with Gemini-3-Pro based agentic frameworks. Our online RL experiments show significant gains from scaling parallel environments from 32 to 512 (+5.2 points) and increasing environment step budget from 15 to 50 (+4.3 points). Finally, the native device-cloud collaboration system improves on-device performance by 33%, reduces cloud model calls by over 40%, and preserves user privacy.

Channel state information (CSI) is essential for adaptive beamforming and maintaining robust links in wireless communication systems. However, acquiring CSI incurs significant overhead, consuming up to 25% of spectrum resources in 5G networks due to frequent pilot transmissions at millisecond-scale intervals. Recent approaches aim to reduce this burden by reconstructing CSI from spatiotemporal RF measurements, such as signal strength and direction-of-arrival. While effective in offline settings, these methods often suffer from inference latencies in the 5-100 ms range, making them impractical for real-time systems. We present GSpaRC: Gaussian Splatting for Real-time Reconstruction of RF Channels, a method that achieves accurate channel reconstruction with latency in the low-millisecond regime or below. GSpaRC represents the RF environment using a compact set of 3D Gaussian primitives, each parameterized by a lightweight neural model augmented with physics-informed features such as distance-based attenuation. Unlike traditional vision-based splatting pipelines, GSpaRC is tailored for RF reception: it employs an equirectangular projection onto a hemispherical surface centered at the receiver to reflect omnidirectional antenna behavior. A custom CUDA pipeline enables fully parallelized directional sorting, splatting, and rendering across frequency and spatial dimensions. Evaluated on multiple RF datasets, GSpaRC achieves similar CSI reconstruction fidelity to recent state-of-the-art methods while reducing training and inference time by over an order of magnitude. These results illustrate that modest GPU computation can substantially reduce pilot overhead, making GSpaRC a scalable low-latency approach for channel estimation in 5G and future wireless systems.

Mobile devices continuously interact with cellular base stations, generating massive volumes of signaling records that provide broad coverage for understanding human mobility. However, such records offer only coarse location cues (e.g., serving-cell identifiers) and therefore limit their direct use in applications that require high-precision GPS trajectories. This paper studies the Sig2GPS problem: reconstructing GPS trajectories from cellular signaling. Inspired by domain experts often lay the signaling trace on the map and sketch the corresponding GPS route, unlike conventional solutions that rely on complex multi-stage engineering pipelines or regress coordinates, Sig2GPS is reframed as an image-to-video generation task that directly operates in the map-visual domain: signaling traces are rendered on a map, and a video generation model is trained to draw a continuous GPS path. To support this paradigm, a paired signaling-to-trajectory video dataset is constructed to fine-tune an open-source video model, and a trajectory-aware reinforcement learning-based optimization method is introduced to improve generation fidelity via rewards. Experiments on large-scale real-world datasets show substantial improvements over strong engineered and learning-based baselines, while additional results on next GPS prediction indicate scalability and cross-city transferability. Overall, these results suggest that map-visual video generation provides a practical interface for trajectory data mining by enabling direct generation and refinement of continuous paths under map constraints.

Digital agents require diverse, large-scale UI trajectories to generalize across real-world tasks, yet collecting such data is prohibitively expensive in both human annotation, infra and engineering perspectives. To this end, we introduce UI-Simulator, a scalable paradigm that generates structured UI states and transitions to synthesize training trajectories at scale. Our paradigm integrates a digital world simulator for diverse UI states, a guided rollout process for coherent exploration, and a trajectory wrapper that produces high-quality and diverse trajectories for agent training. We further propose UI-Simulator-Grow, a targeted scaling strategy that enables more rapid and data-efficient scaling by prioritizing high-impact tasks and synthesizes informative trajectory variants. Experiments on WebArena and AndroidWorld show that UI-Simulator rivals or surpasses open-source agents trained on real UIs with significantly better robustness, despite using weaker teacher models. Moreover, UI-Simulator-Grow matches the performance of Llama-3-70B-Instruct using only Llama-3-8B-Instruct as the base model, highlighting the potential of targeted synthesis scaling paradigm to continuously and efficiently enhance the digital agents.